2008 Toyota Sienna
Mileage
103,942
Service Date
3/13/2026
Services Performed
- SPARK PLUGS – Remove & Replace – [Includes: R&I Upper Intake Manifold.]
- 1. Use Step 1 In the Fuel Tank to Clean the Fuel Tank, Fuel Lines, Injectors, Return Lines. Remove Water and Vanish from the Fuel System, Increase Octane, and Fuel Economy. 2. Use Step 2 In the Crankcase to Clean the PCV System and Saturate the Sulfur and Carbon Deposits in the Emission System Increasing Airflow on to the Exhaust and Reducing Emissions. 3. Connect Specialized Drip tool in Accordance with the Equipment and Manufacturer Specified Procedures and Instructions. 4. DRIP Step 3 Into a Strong Vacuum Source that Leads Directly to the Intake Valves at APPX 2-4 Drips Per Second to Remove the Carbon Deposits from the Intake Valves Increasing the Intake Airflow. 5. Remove the Specialized tool and Reconnect all Hoses and Clamps in Accordance with Manufacturer Specifications. 6. Clean the Throttle-Body with JB Air Intake System Cleaner. 7. Perform Road Test for a Minimum of 15 Minutes at Highway Speed. 8. Check for Leaks, Reset all Applicable Monitors, Sensors, and Maintenance Indicators.
ROYCE N. gave our service a 5 star review on 3/13/2026
