2013 Volkswagen Golf
Mileage
77,201
Service Date
2/25/2026
Services Performed
- Replace Engine Oil, Oil Filter, check fluid levels, and visual inspection, reset service reminder message when applicable.
- Front Brake Pads & Rotors – Remove & Replace
- Rear Brake Pads & Rotors – Remove & Replace
- 1. Connect the Brake Fluid Exchange Machine in Accordance with the Equipment and Manufacturer Specifications and Procedures. Observe All Warnings Cautions and Notes. 2. Evacuate Used Brake Fluid Old the Brake Lines and Master Cylinder. 3. Push Justice Brothers High Performance Brake Fluid through the System to Clean all Varnish and Contamination. 4. Fill the Brake System to the Manufacturer Specified Fluid Level. 5. Bleed the Brakes to Remove all Air from the System. 6. Test For Proper Operation and Check for Leaks.
- 1. Drain the Used ATF from the Transmission. 2. Remove the Transmission Pan, Inspect for Obvious Damage, Corrosion, and Contamination. -If Obvious Damage is Found STOP. Recommend Replacement of Parts Required. -If Corrosion is Found, Clean All Corrosion Prior to the Continuation of Service (Additional Labor May be Required). 3. Remove the Transmission Filter and All Applicable Gaskets and Seals. 4. Install Manufacturer Specified Transmission Filter and all Applicable Gaskets and Seals in accordance with Manufacturer Specified Procedures and Instructions. 5. Install the Transmission Pan in Accordance with Manufacturer Specifications. 6. Use Justice Brothers Automatic Transmission Conditioner to Condition the Metal and Rubber Seals to Prevent Cracking and Leaks. 7. Fill the Transmission to Manufacturer Specified Fluid Level with Manufacturer Recommended Automatic Transmission Fluid (ATF) to Provide Proper Lubrication.
DON G. gave our service a 5 star review on 2/27/2026
