2017 Toyota Prius
Mileage
75,609
Service Date
5/1/2026
Services Performed
- 1. Pour Entire Contents JB Radiator Cleaner in the Existing Coolant/Water. 2. Cycle Radiator Cleaner For 15-60 Minutes at Normal Operating Temperature Neutralize Acids, Dissolve Corrosion Build Up, and Improve Fluid Circulation. 3. Drain Used Coolant/Water and Cleaner to Remove the Harmful Contaminants. 4. Fill the Cooling System with Manufacturer Recommended Coolant (Antifreeze) to the Manufacturer Specified Fluid Level. 5. Use JB Cooling System Protector & Water Pump Lubricant to Condition the Metal; Smooth Out Cuts and Rough Grooves in Metal Caused by Cooling System Operation, Provide Lubrication to the Water Pump, Stop Electrolysis (The Cause of Rust), And Hold the Ph Balance of the Coolant to Prevent Alkaline and Acid Build Up. 6. Pressure Test Cooling System, Check for Leaks and Proper Operation.
- 1. Connect the Brake Fluid Exchange Machine in Accordance with the Equipment and Manufacturer Specifications and Procedures. Observe All Warnings Cautions and Notes. 2. Evacuate Used Brake Fluid Old the Brake Lines and Master Cylinder. 3. Push Justice Brothers High Performance Brake Fluid through the System to Clean all Varnish and Contamination. 4. Fill the Brake System to the Manufacturer Specified Fluid Level. 5. Bleed the Brakes to Remove all Air from the System. 6. Test For Proper Operation and Check for Leaks.
DAVE L. gave our service a 5 star review on 5/2/2026
