BRAKE FLUID LEVEL – INSPECT BRAKE LINEHOSE CONNECTIONS – INSPECT CLUTCH FLUID – INSPECT COOLANT LEVEL – INSPECT DISC BRAKE SYSTEM – INSPECT DRIVE BELTS – INSPECT DRIVESHAFT BOOTS – INSPECT FUEL LINES & HOSES – INSPECT LIGHTING SYSTEM – INSPECT – [Inspect function of all lights.] STEERING OPERATION – INSPECT – [Inspect Steering operation and linkages.] SUSPENSION SYSTEM – INSPECT – [Inspect front and rear suspension, ball joints and wheel bearing axial play.] TIRE PRESSURE – INSPECT – [Tire inflation pressure and tire wear. Inspect a spare tire if installed.] AIR CLEANER ELEMENT – REPLACE BRAKE FLUID – REPLACE CABIN AIR FILTER – REPLACE – [Replace every 30,000 miles (48,000 km) or 24 months.] ENGINE OIL AND FILTER – REPLACE – [Reset the engine oil data whenever replacing the engine oil regardless of the message/wrench indicator light display.] TIRES – ROTATE BOLTS AND NUTS ON CHASSIS AND BODY – TIGHTEN
1. Connect the Brake Fluid Exchange Machine in Accordance with the Equipment and Manufacturer Specifications and Procedures. Observe All Warnings Cautions and Notes. 2. Evacuate Used Brake Fluid Old the Brake Lines and Master Cylinder. 3. Push Justice Brothers High Performance Brake Fluid through the System to Clean all Varnish and Contamination. 4. Fill the Brake System to the Manufacturer Specified Fluid Level. 5. Bleed the Brakes to Remove all Air from the System. 6. Test For Proper Operation and Check for Leaks.
Front Brake Pads & Rotors – Remove & Replace
Rear Brake Pads & Rotors – Remove & Replace
GHEZAL A. gave our service a 5 star review on 10/14/2025
1. Drain the Used ATF from the Transmission. 2. Remove the Transmission Pan, Inspect for Obvious Damage, Corrosion, and Contamination. -If Obvious Damage is Found STOP. Recommend Replacement of Parts Required. -If Corrosion is Found, Clean All Corrosion Prior to the Continuation of Service (Additional Labor May be Required). 3. Remove the Transmission Filter and All Applicable Gaskets and Seals. 4. Install Manufacturer Specified Transmission Filter and all Applicable Gaskets and Seals in accordance with Manufacturer Specified Procedures and Instructions. 5. Install the Transmission Pan in Accordance with Manufacturer Specifications. 6. Use Justice Brothers Automatic Transmission Conditioner to Condition the Metal and Rubber Seals to Prevent Cracking and Leaks. 7. Fill the Transmission to Manufacturer Specified Fluid Level with Manufacturer Recommended Automatic Transmission Fluid (ATF) to Provide Proper Lubrication.
SHISHIR B. gave our service a 5 star review on 4/13/2025